What type of ICMPv6 message provides network addressing information to hosts using Slaac?

Last Updated on January 20, 2019 by

Cisco CCNA 1 ITN v6.0 chapter 7 exam beta answers Routing and Switching (R&S) Introduction to Networks (ITN) (Version 6.00) collection year 2017, 2018 and 2019 Full 100%. CCNA 1 has been know as ITN. The following are the questions exam answers. Guarantee Passed 100%. CCNA 1 v6.0 chapter 7 exam beta answers has some new update from ITN version 6.0 without beta. You can review all chapter 7 exam beta answers. You will get passed scored 100% with this version 6.0. Good Luck for Cisco Netacad ITN v6.0 Exam or ITN Pilot version 6.0 !

This is the first release of this form for the CCNA R&S Introduction to Networks curriculum from Cisco Netacad.com. There are 27 items are available in ITN Chapter 7 Exam Beta. You will get only selected 18 items which are displayed in random sequence, while you take exam with Cisco Netacad.

1. A message is sent to all hosts on a remote network. Which type of message is it?

   • limited broadcast
   • multicast
   • directed broadcast
   • unicast
     

     Explanation:

2. Which two parts are components of an IPv4 address? (Choose two.)

   • subnet portion
   • network portion
   • logical portion
   • host portion
   • physical portion
   • broadcast portion
     

     Explanation:

3. How many bits are in an IPv4 address?

   • 32
   • 64
   • 128
   • 256
     

     Explanation:

4. Which two things can be determined when given an IP address and subnet mask of an attached network device? (Choose two.)​

   • the last host address on a network
   • the default gateway of a specific network
   • the network address of a specific network
   • the prefix length of the next available network
   • The number of networks contained in the organization.
     

     Explanation:

5. What is the purpose of the subnet mask in conjunction with an IP address?

   • to uniquely identify a host on a network
   • to identify whether the address is public or private
   • to determine the subnet to which the host belongs
   • to mask the IP address to outsiders
     

     Explanation:

6. What subnet mask is represented by the slash notation /20?

   • 255.255.255.248
   • 255.255.224.0
   • 255.255.240.0
   • 255.255.255.0
   • 255.255.255.192
     

     Explanation:

7. What does the IP address 172.17.4.250/24 represent?

   • network address
   • multicast address
   • host address
   • broadcast address
     

     Explanation:

8. What are three characteristics of multicast transmission? (Choose three.)

   • The source address of a multicast transmission is in the range of 224.0.0.0 to 224.0.0.255.
   • A single packet can be sent to a group of hosts.
   • Multicast transmission can be used by routers to exchange routing information.
   • The range of 224.0.0.0 to 224.0.0.255 is reserved to reach multicast groups on a local network.
   • Computers use multicast transmission to request IPv4 addresses.
   • Multicast messages map lower layer addresses to upper layer addresses.
     

     Explanation:

9. Which IP address is a valid default gateway for a host on the 10.1.100.0/24 network?

   • 10.1.0.1
   • 10.1.100.254
   • 10.1.1.1
   • 10.0.0.1
     

     Explanation:

10. To what subnet does the IP address 10.1.100.50 belong if a subnet mask of 255.255.0.0 is used?

    • 10.1.0.0
    • 10.0.0.0
    • 10.1.100.32
    • 10.1.100.0
      

      Explanation:

11. Which option shows the proper notation for an IPv6 address?

    • 2001,0db8,3c55,0015,abcd,ff13
    • 2001-0db8-3c55-0015-abcd-ff13
    • 2001.0db8.3c55.0015.abcd.ff13
    • 2001:0db8:3c55:0015::abcd:ff13

12. What are three parts of an IPv6 global unicast address? (Choose three.)

    • an interface ID that is used to identify the local network for a particular host
    • a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP
    • a subnet ID that is used to identify networks inside of the local enterprise site
    • a global routing prefix that is used to identify the portion of the network address provided by a local administrator
    • an interface ID that is used to identify the local host on the network
      

      Explanation:

13. Which network migration technique encapsulates IPv6 packets inside IPv4 packets to carry them over IPv4 network infrastructures?

    • encapsulation
    • translation
    • dual-stack
    • tunneling
      

      Explanation:

14. What are two types of IPv6 unicast addresses? (Choose two.)

    • multicast
    • loopback
    • link-local
    • anycast
    • broadcast
      

      Explanation:

15. Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host?

    • ARPv6
    • DHCPv6
    • ICMPv6
    • UDP
      

      Explanation:

16. An administrator wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured?

    • SLAAC
    • stateless DHCPv6
    • stateful DHCPv6
    • RA and EUI-64
      

      Explanation:

17. Which two IPv4 to IPv6 transition techniques manage the interconnection of IPv6 domains? (Choose two.)

    • trunking
    • dual stack
    • encapsulation
    • tunneling
    • multiplexing
      

      Explanation:

18. Which of these addresses is the shortest abbreviation for the IP address:

    3FFE:1044:0000:0000:00AB:0000:0000:0057?

    • 3FFE:1044::AB::57
    • 3FFE:1044::00AB::0057
    • 3FFE:1044:0:0:AB::57
    • 3FFE:1044:0:0:00AB::0057
    • 3FFE:1044:0000:0000:00AB::57
    • 3FFE:1044:0000:0000:00AB::0057

19. What is indicated by a successful ping to the ::1 IPv6 address?

    • The host is cabled properly.
    • The default gateway address is correctly configured.
    • All hosts on the local link are available.
    • The link-local address is correctly configured.
    • IP is properly installed on the host.
      

      Explanation:

20. Which two things can be determined by using the ping command? (Choose two.)

    • the number of routers between the source and destination device
    • the IP address of the router nearest the destination device
    • the average time it takes a packet to reach the destination and for the response to return to the source
    • the destination device is reachable through the network
    • the average time it takes each router in the path between source and destination to respond
      

      Explanation:

21. A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet?

    • when the router receives an ICMP Time Exceeded message
    • when the RTT value reaches zero
    • when the host responds with an ICMP Echo Reply message
    • when the value in the TTL field reaches zero
    • when the values of both the Echo Request and Echo Reply messages reach zero
      

      Explanation:

22. Which protocol is used by IPv4 and IPv6 to provide error messaging?

    • ICMP
    • NDP
    • ARP
    • DHCP
      

      Explanation:

23. Which ICMPv6 message is sent when the IPv6 hop limit field of a packet is decremented to zero and the packet cannot be forwarded?

    • network unreachable
    • time exceeded
    • protocol unreachable
    • port unreachable
      

      Explanation:

24. Which two ICMPv6 messages are used during the Ethernet MAC address resolution process? (Choose two.)

    • router solicitation
    • router advertisement
    • neighbor solicitation
    • neighbor advertisement
    • echo request
      

      Explanation:

25. What message is sent by a host to check the uniqueness of an IPv6 address before using that address?

    • neighbor solicitation
    • ARP request
    • echo request
    • router solicitation
      

      Explanation:

26. Which ICMPv6 message type provides network addressing information to hosts that use SLAAC?

    • neighbor solicitation
    • router advertisement
    • neighbor advertisement
    • router solicitation
      

      Explanation:

27. A user executes a traceroute over IPv6. At what point would a router in the path to the destination device drop the packet?

    • when the value of the Hop Limit field reaches 255
    • when the value of the Hop Limit field reaches zero
    • when the router receives an ICMP time exceeded message
    • when the target host responds with an ICMP echo reply message
      

      Explanation: