What is the major responsibility for the Occupational Safety and Health Administration?

The roles and responsibilities of OSH professionals vary regionally, but may include evaluating working environments, developing, endorsing and encouraging measures that might prevent injuries and illnesses, providing OSH information to employers, employees, and the public, providing medical examinations, and assessing the success of worker health programs.

Europe

In Norway, the main required tasks of an Occupational Health and Safety Practitioner include:

• Systematic evaluations of the working environment
• Endorsing preventative measures which eliminate reasons for illnesses in the work place
• Giving information in the subject of employees’ health
• Giving information on occupational hygiene, ergonomics and also environmental and safety risks in the work place[51]

In the Netherlands, required tasks for health and safety staff are only summarily defined, and include:

• Voluntary medical examinations
• A consulting room on the work environment for the workers
• Health check assessments (if needed for the job concerned)[52]

‘The main influence on the Dutch law on the job of the safety professional is through the requirement on each employer to use the services of a certified working conditions service to advise them on health and safety’.[52] A ‘certified service’ must employ sufficient numbers of four types of certified experts to cover the risks in the organisations which use the service:

• A safety professional
• An occupational hygienist
• An occupational physician
• A work and organisation specialist.[52]

It shows in Table 1 (based on the European Network of Safety and Health Practitioner Organisations [ENHSPO] survey to) that in Norway, 37% of Health and Safety practitioners had a MSc education level, and 14% in the Netherlands; 44% were BSc graduates and 63% in the Netherlands; and 19% were of a Technician level and 23% in the Netherlands.[52]

USA

Leather craftsman gloves, safety goggles, and a properly fitted hardhat are crucial for proper safety in a construction environment.

The main tasks undertaken by the OHS practitioner in the USA include:

• Develop processes, procedures, criteria, requirements, and methods to attain the best possible management of the hazards and exposures that can cause injury to people, and damage property, or the environment;

• Apply good business practices and economic principles for efficient use of resources to add to the importance of the safety processes;
• Promote other members of the company to contribute by exchanging ideas and other different approaches to make sure that every one in the corporation possess OHS knowledge and have functional roles in the development and execution of safety procedures;
• Assess services, outcomes, methods, equipment, workstations, and procedures by using qualitative and quantitative methods to recognise the hazards and measure the related risks;
• Examine all possibilities, effectiveness, reliability, and expenditure to attain the best results for the company concerned[53]

Knowledge required by the OHS professional in USA include:

• Constitutional and case law controlling safety, health, and the environment
• Operational procedures to plan/develop safe work practices
• Safety, health and environmental sciences
• Design of hazard control systems (i.e. fall protection, scaffoldings)
• Design of recordkeeping systems that take collection into account, as well as storage, interpretation, and dissemination
• Mathematics and statistics
• Processes and systems for attaining safety through design[54]

Some skills required by the OHS professional in the USA include (but are not limited to):

• Understanding and relating to systems, policies and rules
• Holding checks and having control methods for possible hazardous exposures
• Mathematical and statistical analysis
• Examining manufacturing hazards
• Planning safe work practices for systems, facilities, and equipment
• Understanding and using safety, health, and environmental science information for the improvement of procedures
• Interpersonal communication skills[54]

Leather craftsman gloves, safety goggles, and a properly fitted hardhat are crucial for proper safety in a construction environment.

The main tasks undertaken by the OHS practitioner in the USA include:

• Develop processes, procedures, criteria, requirements, and methods to attain the best possible management of the hazards and exposures that can cause injury to people, and damage property, or the environment;

• Apply good business practices and economic principles for efficient use of resources to add to the importance of the safety processes;
• Promote other members of the company to contribute by exchanging ideas and other different approaches to make sure that every one in the corporation possess OHS knowledge and have functional roles in the development and execution of safety procedures;
• Assess services, outcomes, methods, equipment, workstations, and procedures by using qualitative and quantitative methods to recognise the hazards and measure the related risks;
• Examine all possibilities, effectiveness, reliability, and expenditure to attain the best results for the company concerned[53]

Knowledge required by the OHS professional in USA include:

• Constitutional and case law controlling safety, health, and the environment
• Operational procedures to plan/develop safe work practices
• Safety, health and environmental sciences
• Design of hazard control systems (i.e. fall protection, scaffoldings)
• Design of recordkeeping systems that take collection into account, as well as storage, interpretation, and dissemination
• Mathematics and statistics
• Processes and systems for attaining safety through design[54]

Some skills required by the OHS professional in the USA include (but are not limited to):

• Understanding and relating to systems, policies and rules
• Holding checks and having control methods for possible hazardous exposures
• Mathematical and statistical analysis
• Examining manufacturing hazards
• Planning safe work practices for systems, facilities, and equipment
• Understanding and using safety, health, and environmental science information for the improvement of procedures
• Interpersonal communication skills[54]

Differences across countries and regions

Because different countries take different approaches to ensuring occupational safety and health, areas of OSH need and focus also vary between countries and regions. Similar to the findings of the ENHSPO survey conducted in Australia, the Institute of Occupational Medicine found that in the UK, there is a need to put a greater emphasis on work-related illness.[55] In contrast, in Australia and the USA a major responsibility of the OHS professional is to keep company directors and managers aware of the issues that they face in regards to Occupational Health and Safety principles and legislation. However, in some other areas of Europe, it is precisely this which has been lacking: “Nearly half of senior managers and company directors do not have an up-to-date understanding of their health and safety-related duties and responsibilities.” [56]

Identifying Safety and Health Hazards

Hazards, risks, outcomes

The terminology used in OSH varies between countries, but generally speaking:

• A hazard is something that can cause harm if not controlled.
• The outcome is the harm that results from an uncontrolled hazard.
• A risk is a combination of the probability that a particular outcome will occur and the severity of the harm involved.[citation needed]

“Hazard”, “risk”, and “outcome” are used in other fields to describe e.g. environmental damage, or damage to equipment. However, in the context of OSH, “harm” generally describes the direct or indirect degradation, temporary or permanent, of the physical, mental, or social well-being of workers. For example, repetitively carrying out manual handling of heavy objects is a hazard. The outcome could be a musculoskeletal disorder (MSD) or an acute back or joint injury. The risk can be expressed numerically (e.g. a 0.5 or 50/50 chance of the outcome occurring during a year), in relative terms (e.g. “high/medium/low”), or with a multi-dimensional classification scheme (e.g. situation-specific risks).[citation needed]

Hazard Assessment

Hazard analysis or hazard assessment is a process in which individual hazards of the workplace are identified, assessed and controlled/eliminated as close to source (location of the hazard) as reasonable and possible. As technology, resources, social expectation or regulatory requirements change, hazard analysis focuses controls more closely toward the source of the hazard. Thus hazard control is a dynamic program of prevention. Hazard-based programs also have the advantage of not assigning or implying there are “acceptable risks” in the workplace. A hazard-based program may not be able to eliminate all risks, but neither does it accept “satisfactory”—but still risky—outcomes. And as those who calculate and manage the risk are usually managers while those exposed to the risks are a different group, workers, a hazard-based approach can by-pass conflict inherent in a risk-based approach.[citation needed]

Risk assessment

Modern occupational safety and health legislation usually demands that a risk assessment be carried out prior to making an intervention. It should be kept in mind that risk management requires risk to be managed to a level which is as low as is reasonably practical.[citation needed]

This assessment should:

• Identify the hazards
• Identify all affected by the hazard and how
• Evaluate the risk
• Identify and prioritize appropriate control measures[citation needed]

The calculation of risk is based on the likelihood or probability of the harm being realized and the severity of the consequences. This can be expressed mathematically as a quantitative assessment (by assigning low, medium and high likelihood and severity with integers and multiplying them to obtain a risk factor), or qualitatively as a description of the circumstances by which the harm could arise.[citation needed]

The assessment should be recorded and reviewed periodically and whenever there is a significant change to work practices. The assessment should include practical recommendations to control the risk. Once recommended controls are implemented, the risk should be re-calculated to determine of it has been lowered to an acceptable level. Generally speaking, newly introduced controls should lower risk by one level, i.e., from high to medium or from medium to low.[citation needed]

Contemporary developments

On an international scale, the World Health Organization (WHO) and the International Labour Organization (ILO) have begun focusing on labour environments in developing nations with projects such as Healthy Cities.[57] Many of these developing countries are stuck in a situation in which their relative lack of resources to invest in OSH leads to increased costs due to work-related illnesses and accidents. As a 2007 Factsheet from the European Agency for Safety and Health at Work states: “Countries with less developed OSH systems spend a far higher percentage of GDP on work-related injury and illness — taking resources away from more productive activities . . . The ILO estimates that work-related illness and accidents cost up to 10% of GDP in Latin America, compared with just 2.6% to 3.8% in the EU.”[58]

Nanotechnology

Nanotechnology is an example of a new, relatively unstudied technology. A Swiss survey of one hundred thirty eight companies using or producing nanoparticulate matter in 2006, resulted in forty completed questionnaires. Sixty five per cent of respondent companies stated they did not have a formal risk assessment process for dealing with nanoparticulate matter.[59] Nanotechnology already presents new issues for OSH professionals that will only become more difficult as nanostructures become more complex. The size of the particles renders most containment and personal protective equipment ineffective. The toxicology values for macro sized industrial substances are rendered inaccurate due to the unique nature of nanoparticulate matter. As nanoparticulate matter decreases in size its relative surface area increases dramatically, increasing any catalytic effect or chemical reactivity substantially versus the known value for the macro substance. This presents a new set of challenges in the near future to rethink contemporary measures to safeguard the health and welfare of employees against a nanoparticulate substance that most conventional controls have not been designed to manage.[60]

Occupational health psychology

Occupational health psychology (OHP), a related discipline, is a relatively new field that combines elements of occupational health and safety, industrial/organizational psychology, and health psychology.[61] The field is concerned with identifying work-related psychosocial factors that adversely affect the health of people who work. OHP is also concerned with developing ways to effect change in workplaces for the purpose of improving the health of people who work. For more detail on OHP, see the section on occupational health psychology.

Source : wikipedia

What are the responsibilities occupational health and safety?

What are the main health and safety responsibilities of employers?